LUMINA

This luminaire is specifically implemented in all lighting applications in street, parking areas and landscapes. Light distribution in this fitting is asymmetrical and is used to provide a predominantly functional purpose in guiding or leading people and vehicles.


Ideal solution for street lighting and parking areas

Street Lighting CLASS - A2 | A3 | A4 | B | C

Asymmetrical light distribution

Post or wall mounted

Designed to operate a range of LED’s up to 124W

Recommended mounting height 4m to 9m

IP66

SPECIFICATIONS

MODEL NUMBER :
LUMINA

HOUSING : LM 6 die cast aluminium.
LIGHT SOURCE : The fitting is designed to operate a range of LED’s up to 124W. The LED is an Osram high powered LED mounted onto an aluminium circuit board incorporating Zener diodes and thermal protection.
Recommended LED 4000 Kelvin Natural white with CRI >70.
At an ambient temperature of 25° C, the lumen maintenance is 90% at 60 000 hours and 70% at 100 000 hours.
DIFFUSER : Toughened glass or high impact acrylic offering added protection for optical lenses.
LENSES : Modular optical lenses. Material PMMA.
Various lens options available for different applications, allowing for custom solutions.
FINISH : Cast aluminium or powder coated.
MOUNTING : Post mounted or wall mounted. Side or bottom entry with a pole adaptor available for 60mm or 76mm Ø spigots.
Complies with SANS 1088-table 1.
Spigot entry 42mm Ø with a 130mm depth. Recommended mounting height 4m to 9m.
CONTROL GEAR : The electronic power supply is suitable for operation with a 220 - 240 volts. 50 hertz single phase.
Incorporating an electronic trip connector protector with surge protection 6 KV. Additional removable inline surge arrester 10 KV.
FASTENERS : All external screws are stainless steel. Cable glands are SABS approved to insulate IP67 ingress protection.
GASKET : Gaskets are manufactured from post cured silicone rubber material. Silicone gaskets perform in a wide temperature range -40° C to +200° C.
INGRESS PROTECTION : Ingress Protection Rating optical compartment - IP 66.
Ingress Protection Rating gear compartment - IP 66.
MECHANICS : Operating Temperature (Ta) ≤ 35° C.
Weight : 8.3 Kg total including control gear.
Windage : Max. projected areas for mounting 0.03m2
ADDITIONAL OPTIONAL FEATURES :
DAYLIGHT SWITCH :
Photocell can be incorporated.
VANDAL RESISTANT : Tamper proof latch available
DIMMING : Optional dimming is available on request.
INSTALLATION : Level indicator.

COLOURS
LIGHT SOURCE

LED Osram Oslon Square Giant 

No. LED's24 LED's36 LED's48 LED's
LED CURRENT (mA)COLOUR TEMP (K)SYSTEM WATTAGE (W)NOMINAL WATTAGE (W)NOMINAL FLUX (lm)SYSTEM WATTAGE (W)NOMINAL WATTAGE (W)NOMINAL FLUX (lm)SYSTEM WATTAGE (W)NOMINAL WATTAGE (W)NOMINAL FLUX (lm)
350mA5000K
28W23W4332 lm
42W35W6483 lm
55W47W8644 lm
4000K
4316 lm
6473 lm
8631 lm
3000K4006 lm6009 lm8012 lm
500mA5000K
40W34W6112 lm
57W50W9168 lm
75W67W12224 lm
4000K
6061 lm
9092 lm
12122 lm
3000K5630 lm8445 lm11260 lm
700mA5000K
54W48W8336 lm
79W72W12504 lm
107W96W16672 lm
4000K
8219 lm
12329 lm
16438 lm
3000K7602 lm11403 lm15204 lm
900mA5000K
70W62W10476 lm
100W93W15714 lm
130W124W20952 lm
4000K
10226 lm
15339 lm
20452 lm
3000K9454 lm14181 lm18908 lm

The nominal flux of the LED is based on the LED manufacturers data at 25° C.
The environmental conditions of the installation will impact the efficiency of the LED’s.
Due to the continual advancement in LED technology the type of LED is subject to change.

LIGHT DISTRIBUTION

Suggested lens options. Various lens options available for different applications, allowing for custom solutions.

APPLICATION AREAS
  • Indoor or outdoor application.
  • Asymmetrical distribution.
  • Roadways - A3 class, A4 class and B class.
  • Parking areas.
  • Parks and gardens.
  • Residential areas.

TECHNICAL

DIMENSIONS MM

 

INSTALLATION INSTRUCTIONS

Installation Instructions available on request

CERTIFICATIONS

 

RELATED PRODUCTS YOU MAY LIKE  ..............

LUMINA ROTO