FACADE

This luminaire comes in a wide range of sizes.  It provides a stylish solution for creating a visual impact for architectural buildings.

 


Ideal solution for accent lighting

Photocell must be attached

LM6 die cast aluminium and extruded aluminium.

Surface mounted.

IP65.

SPECIFICATIONS

MODEL NUMBER :
FACADE 290 x 150
FACADE 150 x 150
FACADE 100 x 90
FACADE 70 x 95
FACADE 50 x 70
FACADE 40 x 25
FACADE 33 x 40
FACADE 27 x 27
FACADE 17 x 15

HOUSING : LM 6 die cast aluminium and extruded aluminium.
LIGHT SOURCE : The fitting is designed to operate a range of LED’s up to 9.6W/m.
DIFFUSER : PMMA.
FINISH : Powder coated.
MOUNTING : Surface mounted.
CONTROL GEAR : The electronic supply is suitable for operation with 220 – 240 volts - 50 hertz single phase.
FASTENERS : All external screws are stainless steel.
INGRESS PROTECTION : IP65.
MECHANICS : Operating Temperature (Ta) -20° C to +40° C.
FEATURES : Available in various sizes and lengths to allow for customised designs.
Remote power supply.
Cannot operate on a facade during the daylight, must be installed with a photocell.
1 - Power supply per 10m (2x5m). Max spacing per PSU.

 

 

LIGHT SOURCE

LED TAPE IP67

NOMINAL WATTAGE (W/m)NUMBER OF LED'sCOLOUR TEMP (K)NOMINAL FLUX (lm)LED GAP (mm)CUT LENGTH (mm)
4.8W/m60 LED/m4000K670 lm/m16.7mm100mm
3000K623 lm/m
9.6W/m80 LED/m4000K1662 lm/m10mm100mm
3000K1586 lm/m

A higher number of LEDs per meter, will typically provide the best, most evenly distributed lighting effect.
NOTE : Rule of Thumb - The LED gap is the minimum height of the extrusion to avoid spots

APPLICATION AREAS
  • Outdoor application.
  • Facade lighting.
  • Architectural lighting.
TECHNICAL

DIMENSIONS IN MM

COLOURS

INSTALLATION INSTRUCTIONS

Installation Instructions available on request

CERTIFICATIONS

accentClass 3IP65  LED