info@regentlight.co.za +27 11 474 0171

FEATURED PRODUCTS

 

blu2Light

blu2LIGHT
BTB2L001

bluTECH - basicDIM Wireless

basicDIM Wireless
BTBDW001

bluTECH - Sensor

basicDIM Sensors
BTBDS001

bluTECH - 4 Button Keypad

basicDIM Keypad
BTBDK001

bluTECH - Wireless Passive

basicDIM Passives
BTBDPA001

bluTECH - basicDIM PWM

basicDIM PWM
BTBDPW001

 

 

DALI controller with Bluetooth® wireless technology, daylight and motion sensor and HighBay version (XL version)

Combined light and motion detection for up to 4m mounting height (XS), up to 12m (XL)  |  Direct supply from the DALI line, no mains connection required

Integrated Bluetooth MESH radio module  |  Up to 64 DALI drivers addressable  |  Suitable for ceiling or luminaire installation

 

blu2Light - multisensor xs 2
blu2Light blu2Light - multisensor xs 3- multisensor xl 3

 

blu2Light - multisensor xl 3
blu2Light - multisensor xl 3

Wireless controllable with a Android / iOS smart device
No need for an external gateway device  |  Forms automatic wireless communication network with up to 127 nodes
Small form factor for luminaire installation  |  Configurable analog / digital output |  Easily implemented RGB and colour temperature controls
Controllable switched mains output  |  Device firmware can be updated over-the-air.

 

bluTECH - basicDIM Wireless

 

bluTECH - Wireless 1
Rated supply voltage : 220 – 240 V
Mains frequency : 50 / 60 Hz
Radio transceiver operating frequencies : 2.4 – 2.483 GHz
Max. output power radio transceiver  : + 4 dBm
Bus voltage DC DALI output : 12 V
Shortcircuit current DALI output : 7 mA
Max. DALI wiring length :  1 m at 1 mm² cross section
Ambient temperature ta  : -20 ... +50 °C
Max. casing temperature tc : 70 °C

 

Storage temperature ts : -25 ... +75 °C
Dimensions L x W x H : 56.5 x 35.8 x 22.3 mm
Type of protection : IP20

 Component of the basicDIM Wireless system (Casambi ready) Ambient light dependent control and presence detection
Wireless controllable with a Android / iOS smart device |  Power supply via mains
Mounting variants for suspended ceilings and solid ceilings |  Passive Infrared sensor technology
Shutters included to optimize sensor detection

 

bluTECH - Sensor

bluTECH - Sensor2

 

Rated supply voltage : 220 – 240 V
Mains frequency : 50 / 60 Hz
Typ. power consumption : 0.17 W
Max. power consumption : < 0.5 W
Typ. power input on stand-by : 0.15 W
Mounting height max. : 4 m
Detection range, mounted at height of 3 m : ø 8 m
Detection angle : 53°
Light measurement at sensor head : 1 – 2,000 lx (± 20 %)
Radio transceiver operating frequencies : 2.4 – 2.483 GHz

 

Max. output power radio transceiver : + 4 dBm
Ambient temperature ta : 0 ... +50 °C
Storage temperature ts : - 40 ... +85 °C
Dimensions L x W x H : 85 x 85 x 73.3 mm
Type of protection : IP20

Battery powered, wireless wall switch  |  Controls all types of basicDIM Wireless devices
4 scenes |  Dim up / down |  Colour temperature control

 

bluTECH - 4 Button Keypad

Battery Lithium-ion CR : 2430
Battery life : 2 – 5 years, depending on usage
Radio transceiver operating frequencies : 2.4 – 2.483 GHz
Max. output power radio transceiver : + 4 dBm
Wireless range, in open air : up to 60 m
Ambient temperature ta : 0 ... +45 °C

Dimensions L x W x H : 90 x 90 x 12 mm
Type of protection : IP20

Casambi Ready wireless module |  Wireless controllable with a Android / iOS smart device  |  No need for an external gateway device
Forms automatically a wireless communication network with up to 127 nodesSmall form factor for luminaire installation
Digital output: Standalone DALI (compatible)  |  Easily implemented RGB and colour temperature

bluTECH - Wireless Passive

Supply voltage DC : 9.5 – 22.5 V
Max. input current when idle (approximately 3 DALI loads) : 5 mA
Max. DALI bus current : 250 mA
Typ. power input on stand-by : < 0.1 W
Radio transceiver operating frequencies : 2.4 – 2.483 GHz
Max. output power radio transceiver : + 4 dBm
Ambient temperature ta : -20 ... +55 °C
Max. casing temperature tc : 65 °C

Storage temperature ts : -25 ... +75 °C
Dimensions L x W x H : 40.4 x 36.3 x 14 mm
Type of protection : IP20

Casambi Ready wireless module  |  Wireless controllable with a Android / iOS smart device |  No need for an external gateway device
Forms automatically a wireless communication network with up to 127 nodes  |  Small form factor for luminaire installation
4 PWM outputs  |  Easily implemented RGB and colour temperature controls  |  Device firmware can be updated over-the-air

 

bluTECH - basicDIM PWM
Supply voltage DC : 12 – 24 V
Max. input current : 6 A
Typ. power input on stand-by : < 0.3 W
Output voltage DC : 12 – 24 V
Output power (24 V DC) : 144 W
Output power (12 V DC) : 72 W
Max. output current (free allocation to channels) : 6 A
Radio transceiver operating frequencies : 2.4 – 2.483 GHz
Max. output power radio transceiver : + 4 dBm
Ambient temperature ta : -20 ... +45 °C

Max. casing temperature tc : 75 °C
Storage temperature ts : -25 ... +75 °C
Dimensions L x W x H : 72.6 x 30 x 18 mm
Type of protection : IP20