C-LINE TRUNKING SYSTEM
C-LINE Lighting System is not a simple light, it is a sophisticated lighting solution. With its advantages of energy-efficiency, low maintenance costs and convenient installation, it is an ideal alternative to traditional linear fluorescent lights in a variety of industrial and commercial applications. The C-Line Lighting System is a modular concept consisting of trunking rails, luminaire inserts and accessories.
DISCONTINUED - REPLACED BY THE S-LINE
The C-LINE trunking system for challenging lighting demands in all applications. With fully compatible modular kit, it adapts individually to complex lighting tasks. All functions such as power supply and lighting control are seamlessly integrated into this multi functional trunking.
Luminaires can be positioned flexibly and the system can be adapted to suit structural alterations at any time. The trunking rail is simply a matter of replacing or adding lighting modules, light sources or optics as required.
CST-15N-05WH - C-LINE TRUNKING SYSTEM - 5 CORE
CST-15N-07WH - C-LINE TRUNKING SYSTEM - 7 CORE
CSL-1540-40WD-05WH - C-LINE WIDE DISTRIBUTION 40W
CSL-1540-40DL-05WH - C-LINE ASYMMETRIC LEFT DISTRIBUTION 40W
CSL-1540-40DR-05WH - C-LINE ASYMMETRIC RIGHT DISTRIBUTION 40W
CSL-1540-40AS-05WH - C-LINE DOUBLE ASYMMETRIC DISTRIBUTION 40W
CSL-1565-40WD-05WH - C-LINE WIDE DISTRIBUTION 65W
CSL-1565-40DL-05WH - C-LINE ASYMMETRIC LEFT DISTRIBUTION 65W
CSL-1565-40DR-05WH- C-LINE ASYMMETRIC RIGHT DISTRIBUTION 65W
CSL-1565-40AS-05WH - C-LINE DOUBLE ASYMMETRIC DISTRIBUTION 65W
CSA-CO-3000 - SUSPENSION KIT
CSP-052807 - SURFACE CLIP
CSA-BC-15-WH - BLANK COVER
CS-EC-WH - END CAP
CSA-FN-07 - POWER-FEED CONNECTOR - 7 CORE
CSA-FN-05 - POWER-FEED CONNECTOR - 5 CORE
CSN-L02-05WH - L NODE CONNECTOR, STANDARD 5, 5 WIRE, WHITE
CSN-T02-05WH - T NODE CONNECTOR, STANDARD 5, 5 WIRE, WHITE
CSN-X02-05WH - X NODE CONNECTOR, STANDARD 5, 5 WIRE, WHITE
CSN-L02-07WH - L NODE CONNECTOR, STANDARD 5, 7 WIRE, WHITE
CSN-T02-07WH - T NODE CONNECTOR, STANDARD 5, 7 WIRE, WHITE
CSN-X02-07WH - X NODE CONNECTOR, STANDARD 5, 7 WIRE, WHITE
TRUNKING RAIL : Trunking rail is standard with 5 or 7 core through-wiring with 2.5mm² cable cross-section.
Separate power supplies, dimming or emergency supply can be integrated with the 7 core wiring. L, T and X Standard Module Node connectors available.
LIGHT SOURCE : The fitting is designed to operate a range of LED’s up to 65W.
OPTICS : Wide distribution, asymmetric distribution or double asymmetric distribution available.
MOUNTING : Suspended or surface mounted
ACCESSORIES : Blank cover, cord hanger (max. length 3000mm), ceiling mounting clip and track spot light.
SYSTEM EFFICIENCY : 150 lm / W.
OPERATIONAL TEMPERATURE RANGE : -10° C ~ +40° C.
CCT : 4000K .
CRI : > 80.
DIMENSIONS : 1416mm x 73mm x 40.8mm.
APPLICATION : Suitable for indoor use only.
Operating Temperature (Ta) - 20° C to +30 ° C.
WEIGHT : 1.69 Kg.
NOTE : Ceiling details need to be supplied to design for the layout.
The cable in the trunking with pre-assembled connectors makes it possible to join trunking units without the use of any tools. 3 circuit pre-selection via moving of contact pin prior to installation in rail. The maximum current is 16A, allowing 44 tubes of 120cm 65W in one serial.
Electrical feed possible in central or end area of a trunking rail arrangement via special trunking rail element. Wide distances between suspension points to 3m with self-supporting connector elements. Flexible electrical feed-in and feed-out points.
Terminal feed-in connector for easily connecting with electricity.
For standard light function, 3-circuit optional, Independent switchable circuits for easy light control.
For standard and dimming function or standard and emergency function.
3 different dimming system, DALI, 1-10V and DIMswitch.
Emergency Lighting Function
This function can work on normal mains and automatically switch to emergency supply in the event of a power failure.
A wide variety of self contained batteries are available, as well as two independent emergency lighting circuits in the trunking.
L, T and X Standard Module Node connectors.
Node connector can be electrical feed-in.
Each node connector has diverse electrical feed-in and feed-out.
All system components can be combined without tools. L, T and X connectors expand the system's application range.
- Indoor application.
- Asymmetrical or symmetrical distribution.
- Retail lighting.
- Commercial lighting.
- Warehouse lighting.
- Industrial lighting.