This square wall or ceiling mounted sconces with UV stabilised high impact opal acrylic diffuser. A range of die-cast aluminium and extruded bulkhead luminaires offered in two style variants. Available as an emergency lighting variant - they are suitable for both interior and exterior applications.
Ideal solution for commercial developments.
LM 6 die cast aluminium and extruded aluminium.
Wall or ceiling mounted.
MODEL NUMBER :
HOUSING : LM 6 die cast aluminium and extruded aluminium.
LIGHT SOURCE : The fitting is designed to operate a range of compact fluorescent lamps up to 26W and LED up to 16W.
DIFFUSER : UV stabilised high impact opal acrylic.
FINISH : Powder coated.
MOUNTING : Wall mounted or ceiling mounted.
LUMEN MAINTENANCE : 50000h (L90B10).
CCT : 4000K or 3000K .
CRI : 80.
CONTROL GEAR : The electronic supply is suitable for operation with 220 – 240 volts. 50 hertz single phase.
FASTENERS : All external screws are stainless steel.
GASKET : Gaskets are manufactured from post cured silicone rubber material. Silicone gaskets perform in a wide temperature range -40° C to +200° C.
INGRESS PROTECTION : IP 66.
MECHANICS : Operating Temperature (Ta) ≤ 35° C
Weight : 4 Kg total including control gear.
LED Osram Duris E5
|LED CURRENT (mA)||NOMINAL WATTAGE (W)||COLOUR TEMP (K)||NOMINAL FLUX (lm)|
Osram Duris E5 LED designed for > 54 000 hours.
* Lower wattages on LED can be offered by reducing the
drive current. This is available on request only
|VOLTAGE (V)||NOMINAL WATTAGE (W)||COLOUR TEMP (K)||NOMINAL FLUX (lm)|
Conventional Light Source
|1 or 2 x 23W||E27||-|
|1 or 2 x 18W||G24||G24|
|1 x 26W||G24||G24|
|2 x 9W||-||G24|
|2 x 13W||-||G24|
|1 x 18W||G24|
- Indoor or outdoor application.
- Commercial developments.
- Retail developments.
- Shopping malls.
- Public buildings.
- Residential developments.